249cc liquid cooled (only one radiator)
YZ250F Based aluminum frame with steel subframe and engine cradle
Fuel injection
"Supermoto inspired styling"
A 298mm single disc front brake.
10.8'' of travel front and rear
Adjustable forks and shock. With rear linkage suspension
single cylinder engine based on the '08 R1 with a crank balancer
2.2 gallon gas tank and an estimated 70 mpg
top speed...100 maybe with some gearing and a tail wind
track beast...
ADV? No Problem'o
UTV????
Canyon Beast...
Dirt bike
Stunt bike
even a crop duster
Yes the WR250X is all this and more!!!! About the only thing it's not....is fast.
The YZF-1/4R1 also know as the WR250X
-
- Noob
- Posts: 47
- Joined: Sat Mar 30, 2013 6:32 pm
- xjrguy
- Site Admin
- Posts: 894
- Joined: Tue Jul 22, 2008 12:14 am
- Location: The Garage
- Contact:
Re: The YZF-1/4R1 also know as the WR250X
These are great shots!
The bike seems to be very versatile, a Swiss Army knife on two wheels.
The bike seems to be very versatile, a Swiss Army knife on two wheels.
2022 Subaru Ascent Touring
2022 Subaru WRX GT
2023 Subaru Outback Wilderness
2023 Subaru BRZ Limited
1973 Lincoln Continental Coupe 460/C6
2010 Kawasaki Concours 1400 ABS with some farkles
2022 Subaru WRX GT
2023 Subaru Outback Wilderness
2023 Subaru BRZ Limited
1973 Lincoln Continental Coupe 460/C6
2010 Kawasaki Concours 1400 ABS with some farkles
-
- Noob
- Posts: 47
- Joined: Sat Mar 30, 2013 6:32 pm
Re: The YZF-1/4R1 also know as the WR250X
Just wish it was a 450
- the1904kid
- Noob
- Posts: 66
- Joined: Sat Mar 30, 2013 3:33 pm
Re: The YZF-1/4R1 also know as the WR250X
I fixed that typo for you.Norman Perez wrote:Just wish it was a DRZ
2006 CRF450R Supermoto
2004 CRF450R Dirt/Desert Machine
2007 DRZ400SM Streetard
2004 CRF450R Dirt/Desert Machine
2007 DRZ400SM Streetard
-
- Noob
- Posts: 47
- Joined: Sat Mar 30, 2013 6:32 pm
Re: The YZF-1/4R1 also know as the WR250X
Has the Honda thrown you off so many times that you're back on the DRZ wagon?
- Tetge
- Fourth Gear
- Posts: 2528
- Joined: Fri Sep 12, 2008 12:00 pm
Re: The YZF-1/4R1 also know as the WR250X
Although people have crashed their DR-Z's, I still believe that the DR-Z has very nice street manners and that the geometry of the DR-Z lends itself to general stability and good manners. This is not to say that it is a perfect handling bike, but, it sure works well all things considered. But, I have always liked the slower turning in of Suzuki bikes, although you really have to work if there are quick changes of direction, such as S's. I distrust Kawasaki* front ends as several have washed on on me, and Yamaha's**, although competent, seem to be a bit knife edge for my tastes. I am not surprised that people are so aware of the way a Yamaha turns in and how the tires are working, etc., since this would be a result of the knife edge precision handling that Yamaha favors. Hondas are unknown to me as I have never owned one, perhaps because I was turned off by the old "You meet the nicest people on a Honda" line. I confess to really liking the way that Suzuki's handle although in all the years I owned my 1987 Guzzi, it never once put me on the ground.Norman Perez wrote:Has the Honda thrown you off so many times that you're back on the DRZ wagon?
* I had a new second year Kawasaki 500 Triple and it washed out the front end multiple times and finally went down on one of the wash outs. I also had a new 675cc Kawasaki twin that looked like a Brit bike and it has a funky feeling front end which washed out on my brother and nearly killed him. I saw Brakelate lose the front end several times on his Kawasaki's but, apparently as a Kawasaki lover, this was not bothersome to him.
** I had a new 1967 Yamaha 350 Twin, as my first bike ever that I owned, and it had very precise handling for the time. It was a solid motorcycle capable of some good performance. Much later I had a new Yamaha 125 Twin reed valve when I was broke and I really needed a motorcycle. It was very feisty in the power department (magazine tests showed it having 13.75 RWHP from its 7.5 cubic inch engine) and it would do very good burnouts on the concrete of a gas station. It actually made quite an induction howl when it was really making power. It also packed me and my ex-spouse to San Francisco and back from Walnut Creek on the freeway at speeds up to 80 MPH, several times. And it handled sharp and crisp and precise, just like a Yamaha. But, the Yamahas, although good motorcycles, were almost too precise for my tastes as things that favor precise input do not reward careless input.